Click for more is a kind of land survey dealing specifically with the boundaries of the property. All monumental land surveys use physical monuments to mark the boundaries on the land itself. Commonly, the corners of the property are marked with a long iron rod driven vertically into the ground, though there are lots of other types of physical monuments which may be used.
These monuments are designed to be as permanent as possible, though land surveyors many decades ago used wooden posts or natural features which might be destroyed over time, making it difficult to re-trace their work today. Monuments in use today will have a cap on top of the iron rod identifying the surveyor who placed it.
This physical monument allows the easy finding of the boundaries and corners of the property when one is physically on the land, even though monumental land survey itself has some limitations as far as the other information provided. For example, it usually is not concerned with any improvements on the property, such as for example fences or homes, and will not determine whether they were created to code or comply with zoning regulations.
Often, a monumental survey is undertaken in combination with other types of land surveys to show additional information concerning the property. For example, a monumental survey may be coupled with a title survey, which will examine more than the boundaries in determining anything affecting ownership of the land in question.
In many cases, a monumental land survey could be undertaken when there is a dispute over the exact land boundaries. For instance, in case a fence has been built or is about to be built on the land, a monumental land survey can mark the precise corners and the boundary between your two properties so that the fence's position based on the legal property boundary can be evaluated. The monumental land survey is also useful when in the look stages of a construction project.
Before a land surveyor may place the monuments, there are several other steps to take, a lot of which are in fact done away from the house in question. Actually, placing the monuments is near the end of the monumental land surveying process. First, the surveyor must clarify exactly where the boundary ought to be located by considering the title and legal description of the house, among other information. Then, these boundaries must be measured on the land itself before they can be marked, and the surveyor will seek out any preexisting corner monuments from previous surveys, evaluating their accuracy to determine whether the boundary was correctly placed by the prior surveyor. Finally, the brand new monuments are set into place.
Boundary monuments are put at every corner of the house, including any angle or change of direction of the boundary line. The survey data is then recorded in a land survey plat. local contractor of this survey will provide a basis for any future land surveys of the property. If such information is never recorded properly, it will not be available for future land surveyors if the land is re-surveyed at any point in time. This information carries a scale drawing of the land and its boundaries, all necessary dimensions to permit a surveyor to determine the property boundaries while in the field and an in depth description of all monuments found or used on the property.
